Electric Fireplace Wall Hanging Ideas
Unlike traditional gas or wood fireplaces Wall-mount electric fireplaces can be hung right out of the box. These fireplaces can be an excellent way to add ambience to your home without the need to remodel or venting.
However, they usually require careful installation because they're usually heavy. Follow these steps to set up your new electric fire correctly.
1. Connect the Brackets
A wall-mounted or recessed electric fireplace instantly enhances the appearance of any room. It's the ideal option for homes with no existing fireplace opening or apartment living.
First, decide where you'll put your new electric fire. It's important to find a location that won't be susceptible to moisture and is at least a few inches away from furniture, drapes and areas that are prone to traffic. Once you've found a spot, mark the wall with layout marks for the top and bottom plates of the fireplace frame.
Make use of a drill or another tool to make exploratory holes in the wall. Check for studs using a stud-detector. Mark the drywall according to the location of the fireplace mounting brackets. Next, build out the wall or patch and paint the drywall to prepare it for fireplace installation.
Depending on your chosen wall-mounted fire, you might either need to fit the screen and firebox as one unit or separate them using a wall bracket. If you're not sure about your capability to complete this task, hire a general contractor or a skilled carpenter.
You will find templates included with the majority of electric fireplaces. However you should keep a level in your pocket and pencil to mark the exact spot where the wall brackets will be installed. Before drilling, make use of the template to check that the fireplace's power cable is able to reach from the place of installation to an outlet nearby to plug it in.
Install drywall as smooth and as flush as is possible to give the fireplace a clean appearance. Trim the bottom edge, and then sand, paint and finish the frame.
You will need to insert the slots or hooks on the back of most electric fireplaces that are wall mounted into the brackets for mounting. Be sure to align the hooks or slots before connecting the fire brackets. Once the fire is set, you can add any additional elements such as crystal embers or driftwood log pieces or decorative rocks.
2. Check the Bottom Bracket
The space above the fireplace, mantel, or chimney breast is the perfect spot to hang artwork. However, there's a fine line between an artistic arrangement and one that detracts from the overall design of the fireplace design.
A general rule of thumb is that a picture should not exceed 80% of the length of the fireplace or mantel it sits over. This will keep it proportionate and will make it look nice on the wall. Other decorative and ornamental items placed on the mantel may also influence this size & proportional guideline.
If you're planning to hang a picture above your electric fireplace, you must ensure that the frame is made from glass or another material that is resistant to high temperatures. If you're not sure about the frame, you can test it frame with a heat sensitive cloth to determine if it is suitable for this application.
Best electric fireplace wall mount of destroying artwork due to smoke or scattered heat is a common concern when displaying pictures in front of a fireplace. This is not an issue with gas or wood-powered fireplace. However, if you plan to install an electric wall fire it is essential to follow the instructions provided by the manufacturer.
Most electrical fires come with mounting brackets that can be attached to the wall by hanging screws or wall-mounted fixing systems. If the latter, it is recommended to drill exploratory holes into a distinct area of the wall prior to when you attempt to mount your electric fire. You can then make use of a cable and pipe finder to make sure there aren't any cables or pipes close to the location where you want to mount your fire.
If so, you could put your fire in the electrical socket or move it to another spot. If you decide to move it to a new location, you'll need to ensure that the power cable can extend from the fire to the electrical socket - this is crucial for older houses or homes with solid walls. If you don't do this, your electric fireplace won't work properly. Some models include templates that show you where to drill holes, while others require you to use a pencil and a spirit level to mark the locations on your wall.
3. Connect the Power Cord
If you've installed a recessed electrical fireplace, you may have to relocate the plug socket from the wall to behind the fireplace. This will give it a more sleek look. Check the fireplace first to make sure it works correctly.
The third option to install an electric fireplace is framing the space and building it into the wall. This gives you a classic style, a polished look, and allows the installation of the installation of a mantel. The owner's guide for your model will include details on framing, wiring, and securing the fire.
If you're ready for mounting your new electric fireplace on the wall begin by marking the area of installation using a marker or pencil. Then apply a carpenter's level to make sure that the area of installation is flat and level. You can use a studfinder to mark the location to know you are drilling in a secure area.
After you've marked your location of the installation and marked the location, use your drill to create holes for the bracket screws or hanging screws. Make sure to follow the exact instructions in the owner's manual for this step, particularly when you're installing the fireplace in a drywall. If you're unsure of what to do then you can ask a professional for help.
You can also conceal power cords from view using cable organizer kits. These kits usually include sleeves, clips or boxes for bundling cables. You can use wire snakes or fish tape to guide the cords. If you don't want to cut into the drywall, a powerbridge kit will provide a cleaner and safer connection.
You can also camouflage cords with paintable wire covers, or by tacking them to the wall. Make sure to keep the cover or tacks from sources of heat. This will shield the cord from being damaged and will also prevent accidental contact.
4. Connect the adapter
A wall-mounted electric fireplace is a great choice for home renovations or for those who don't have the space or funds to put in a gas fireplace. They are easy to install and are ready to use right from the box. They can be a great alternative for those seeking a modern and stylish design or the warmth the fire can bring. These units can be put up on any wall, just like art, and are electric with fan-powered heat.
Before you begin the actual installation process, it's a good idea to make a list of all the tools and equipment you'll require. You can find detailed instructions on how to mount an electric fire in the user's manual. Some models will require you to fix the brackets directly to the wall while others might have a mounting plate that slides into slots or hooks that attach to the brackets for mounting. It is important to remove any combustible materials from the area where you will be installing a recessed unit. In general, you should keep these materials at least 3 feet away from the front of the fireplace.
After you have checked all parts After you have checked all the components, plug in your electric fire and make sure it is working. This is an essential step to ensure that the flame effect screen and heater function exactly as they were intended to. This will give you a good idea of the final product's final state.
If you're confident that your electric fire is operating correctly, you should consider covering the power cord. This will help keep the final product neat and tidy. This can be accomplished by using paintable wire covers or you can choose to install a new outlet that allows you to tuck the cord behind the unit. This will provide seamless finishing to your fireplace.